TOSCANO

Overvoltage protection device, caused by voltage increases in three-phase systems. It also protects against surges caused by lightning strikes or switching network. Meets the disconnection times established...

TDS1000 – Series multi-function universal frequency inverter Small volume, suitable for all kinds of spots. 150% of rated torque at 1Hz frequency. Built-in PID controller. 6 (maximum)...

Conductive probe level sensing relay. Well control. One probe (low level). Adjustable reset time. Adjustable sensitivity. Dual voltage supply 230/400 VAC. Plugs into 11-pin socket. IMPORTANT:...

CT5 is a continuity or electrical resistance tester (ohm, Ω). Emits an acoustic and luminous signal (led) proportional to the magnitude of the measure: If the resistance value is...

Control relay for phase secuence/phase failure. Controls all the three phases present, as well as its corret phase sequence, referencing its power supply. Knob-adjustable level setting on the front. 3-phase...

Based on MCU (Micro Processor Unit) / 2 transformers. Overload protection, underload, phase loss and locked rotor. Underload range: up to 0.5 A less than the OC. Displays the cause of failure by screen...

Developed to protect against overvoltages and surges caused by lightning strikes over the continuous part of photovoltaic systems. It incorporates thermal disconnectors indicating the failing  element...

Surge protector for RS232 serial port. Specifications: Maximum voltage Uc: 15VDC / 10 Vac Nominal current In: 1A Nominal transient current (8/20μs): 5 kA Maximum transient current (8/20μs):...

Level sensor with analog output for applications in tanks. Output signal: 4-20 mA (depending on level). Measuring range: 0-5m and 0-10 m water column. Power supply: 24VDC.

Alternating contact relay by voltage input control. Very narrow: 18 mm only. State memory in supply cut. The equipment incorporates two relays, alternatively connected when powered. Assembly in DIN...