WEG

Since January 2015, IE1 motors placed onto the EU/EEA and rated at 7.5kW or above is allowed only if their design falls outside of the scope of the EU Regulation or their final installation will be outside...

Standard Features: Efficiency level: IE3 according to IEC 60030-34 standard. TEAO - Totally Encoled Air Over. Degree of protection: IP55. Output: 0.12 up to 330kW. Number of poles: 2, 4, 6 and 8. Multivoltage...

Standard Features: Three-phase, multivoltage, IP55, TEFC. Output: 0.12 up to 315 kW. Frames: 63 up to 355M/L. Voltage: 220-240/380-415V (up to 100L) / 380-415/660V (from 112M and up). Class “F”...

Designed to protect electrical circuits, generators and motor branch circuits against overcurrent conditions, WEG’s Molded-Case Circuit-Breakers go up to 1600A and short-circuit breaking capacity...

Standard Features: Single-phase, IP55. Output: 0.25 up to 7.5kW. Frames: 63 up to 132M. Voltage: 220 / 440V. Class “F” insulation (ΔT = 80K). Squirrel cage rotor / Aluminium die...

The MSW Switch-Disconnectors enable the manual drive of motors, machines and other equipment. Available in versions to mount on panel doors or base with currents up to 160A. Main Characteristics: The...

High precision electronic circuits protected against line noises. Compact and suited for direct mounting on 35 mm DIN rail or with fixing screws. LEDs for status indication and high reliability contacts. Main...

Standard Features: Three-phase, IP55, TEFC. Frequency: 50 or 60 Hz. Output: 90 up to 440 kW. Number of Poles: 2, 4, 6 and 8. Frames: 315L to 355A/B. Mounting: B3T. Voltage: 1.2 to 6.6 kV. Class...

High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency and Low cost of Ownership throughout the entire motor lifetime have been the basis for the W22...

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors. Features: Voltage: 220 to 575...