Electric motors

Standard Features: Three-phase, multivoltage, IP55, TEFC. Output: 0,12 up to 37 kW. Frames: 112 up to 200M/L. Voltage: 220-240/380-415V (up to 100L) / 380-415/660V (from 112M and up). Class “F”...

Standard Features: Frames 63 up to 132 S. Outputs: II pole: from 0.37kW up to 3kW. IV pole: from 0.25kW up to 2.2kW. Run and start capacitor. Class “F” insulation. Service factor...

Standard Features: Three-phase, multivoltage, IP55, TEFC. Output: 0.12 up to 11 kW. Frames: 63 up to 132M. Voltage: 220-240/380-415V (up to 100L) / 380-415/660-690V (from 112M and above). Class...

Totally enclosed fan cooled motor, suitable to operate at 300°C ambient temperature during 01 hour, once only. Standard Features: Suitable to operate at 300 °C ambient temperature during 01...

Totally enclosed air over motor, suitable to operate at 300°C ambient temperature during 02 hours, once only. Standard Features: Suitable to operate at 300 °C ambient temperature during 02...

Standard Features: Three-phase, multivoltage, IP55, TEFC. High efficiency - complying with IE2 efficiency levels according to IEC60034-30. Output: 0,12 up to 500kW. Number of Poles: 2, 4, 6 and 8. Frames:...

Since January 2015, IE2 motors placed onto the EU/EEA and rated at 7.5kW or above, must be used with a VSD unless their design falls outside of the scope of the EU Regulation or their final use will be...

Since January 2015, IE1 motors placed onto the EU/EEA and rated at 7.5kW or above is allowed only if their design falls outside of the scope of the EU Regulation or their final installation will be outside...

Standard Features Three-phase, IP55, TEFC. IE4 efficiency level. Degree of protection: IP55 - IPW66 (optional). Rated power: 7,5 kW to 315 kW. Frame size: 132S to 315S/M. Base Speed:...

Standard Features: Output: 18.5 to 450 kW. Number of poles: 2 to 8 poles. Frame sizes: 180L to 355M/L. Voltage: up to 660 V. Frequency: 50 or 60 Hz. Service factor: 1.00 or 1.15. Degree of Protection:...