Electric motor WEG

Since January 2015, IE1 motors placed onto the EU/EEA and rated at 7.5kW or above is allowed only if their design falls outside of the scope of the EU Regulation or their final installation will be outside of the EU/EEA.

Standard Features:

ELECTRICAL:

• Three-phase, Multivoltage.
• Single-speed (technical data for two speed and three speed available under request).
• Class “F” insulation – “B” Temp. Rise-80K (unless otherwise indicated).
• Ambient temperature: 40 °C at 1000 masl.
• Service factor: 1.0.
• Design: N.
• Continuous duty: S1.
• Dip and continuous resin flow impregnation.

MECHANICAL:

• Degree of Protection: IP55.
• Squirrel cage rotor/Aluminium die cast.
• Enclosure: TEFC-Totally Enclosed Fan Cooled / TEAO-Totally Enclosed Air Over.
• Pad mounted model: frame sizes up to 132.
• Foot mounted model: all frames sizes.
• Mounting: B3 (B30 for pad mounted motors).
• V´ring seals.
• Ball bearings.
• Threaded shaft end center hole.
• Drain plug.
• Metric threaded cable entries.
• 1 meter long flying leads for pad mounted motors (without terminal box).
• Standard color: RAL 5009.